Logo SACITH
00shower trap
ESR shower trap in the shower tray, cover removed: the hair catcher is visible
The ESR shower trap installed in the shower tray of a bathroom

ESR

Rectangular shower trap–Extra Slim
designed bySACITH
patent pending
scroll
01shower tray hole

A rectangle.Nothing else.

The hole in the shower tray becomes a slot: the whole mechanism stays below the surface. The hole profile changes with the version you choose.

0
mm
hole length
Choose the version2 options · tap to switch
159 mm38 mm142 mm32 mm
Section of the ESR siphon: grip, water and wall
02how it works

How the siphonworks.

One section is enough to explain it: the wall shapes the path, the trapped water seals against odours, and the grip stays within reach.

  1. Siphon gripThe gripping point: hold it and pull, no tools needed.
  2. Siphon waterThe trapped column of water: this is what blocks rising odours.
  3. Siphon wallIt separates the two paths and forces the water through the U.
03removal

It lifts out.Instantly.

The siphon comes out in one move and maintenance is immediate.

04siphon height

Fiftymillimetres.

The siphon works within a height of 50 mm. Compliant with the standards in force.

50
mm
siphon section
Section of the ESR siphon with the 50 mm height dimension
05hair catcher

The combstops everything.

No more blockages.A hair catcher comb intercepts hair before it reaches the drain. It prevents blockages and makes cleaning far easier: pull it out, empty it, put it back.
ESR hair catcher comb
01pull it out02empty it03put it back
06two options

Flangeor plates.

Same siphon, two ways of meeting the shower tray: a technopolymer flange, or stainless steel plates for minimal bulk.

Exploded view of the PA6 flange version
option 01

PA6 flange

PA6 technical plastic. The flange rests on the shower tray and covers the edge of the hole.

ESRH50100158 × 37 mmthk. 8 mm
Flange dimensioned drawing: 158 × 37 mm, 8 mm thick
Exploded view of the AISI stainless steel plates version
option 02

Stainless plates

AISI stainless steel. The plates keep bulk to a minimum, needing very little room for installation.

ESRH50200140 × 30 mmthk. 2 mm
Plates dimensioned drawing: 140 × 30 mm, 2 mm thick
07removable internal cap

Three steps to inspectthe whole trap.

The internal cap is removable: it lets you reach even the least accessible areas with the various cleaning tools.

Step 1: hair catcher removal
step 01

Hair catcher removal

Pull out the comb and empty it.

Step 2: siphon wall removal
step 02

Siphon wall removal

The siphon body comes out by hand.

Step 3: internal cap removal
step 03

Internal cap removal

The unloading area is now reachable.

08outlet without ring nut

No ring nut,nothing to tighten.

ESR trap outlet: straight pipe with no ring nut

The first trap in the catalogue with a push-fit connection for pipes with a gasket, with no ring nut to screw on.

09configurator

Pickyour version.

Exploded view of the PA6 flange version, code ESRH50100
Exploded view of the stainless plates version, code ESRH50200
exploded view
Version shown · 1/2PA6 flangeCodeESRH50100

The siphon unit is identical in both versions: only the way the trap meets the shower tray changes. Choose one and the sheet updates.

Choose the version2 options · tap to switch
CodeESRH50100
Visible finishVisible flange
MaterialPA6 · technical plastic
Shower tray hole159 × 38 mm
Component size158 × 37 mm
Thickness8 mm
Siphon height50 mm
Hair catchercomb, removable
Internal capremovable
Outletstraight pipe, no ring nut
Patentpatent pending
159× 38 mm
shower tray hole
50mm
siphon height
3steps
down to the unloading area
Bathroom with shower tray and the ESR trap installed

Thank you.

ESR · Extra Slim Rectangular · shower trap
ESRH50100ESRH50200
patent pending product